6 Replies Latest reply on May 13, 2014 5:44 AM by Chris Sirett

    OHDA Configuration, Ultimate Bending Moment

    Chris Sirett

      Morning Folks, This would be my first attempt at posting on exchange.

      I’m in the middle of configuring OHDA with our Construction Standards and Material Specifications. I ran into a little snag while requesting specifications from the manufacturer regarding the Ultimate Bending Moment for Pole attachment hardware. OHDA Assembly Creator and the Help files specifies the need for the ultimate bending moment for pole attachment hardware. I opened up the XML for pole attachment hardware and it the XML tags enclosing the value I had input for Ultimate Bending Moment are specified as Max Tensile Strength.

      So my question is: What does OHDA want for Pole Attachment Hardware? Ultimate Bending Moment or Max Tensile Strength?

       

      <BoltSpec>

        <Name>PS 3quarter in Bolt</Name>

        <Diameter>0.062499875</Diameter>

        <MaxTensileStrength>73755.3297760375</MaxTensileStrength>

        <SpecUid>6f52fd72-f557-4d5b-b9cb-884f6f637ab8</SpecUid>

      </BoltSpec>